Table of Contents
Advertisement
Configuration Context Command Syntax
Syntax:
show access-controller <slot-id>
Displays the following for the access controller in slot-id (a - h).
Versions
Current status
Uplink MAC Address
Syntax:
show access-controller <slot-id> [client-ports]
Displays the downlink client ports for each client VLAN
configured on the access controller in slot-id (a - h)
Syntax:
show access-controller <slot-id>
Displays the uplink network ports configured on the
access controller in slot-id (a - h)
Syntax:
show access-controller vlans
Displays the 802.1Q VID and Name of all configured
client VLANs on the 5300xl switch. If two ACMs are
installed, their client VLANs are presented in the list.
Displaying Access Controller xl Status from the 5300xl CLI
ACM version information for
support staff.
BIOS error
booted
booting
booting timed out
configuration fault
failed to boot
halted
initializing
not responding
performing self-test
rebooting
running
self-test failed
shutting down
shut down (safe for removal)
ACM MAC address that appears in
the 740wl/760wl Administrative
Console as the System ID.
[uplinks]
25
Advertisement
Table of Contents
