Wall Hanging - Pioneer PDM-4001 Technical Manual

Special installations (Wall hanging)

3.4.2 Wall hanging

This display may be wall-mounted. Since this form of mounting affects ventilation patterns inside, observe the following
requirements:
1 When mounting plate metal, avoid blocking any ventilation holes. Use plate metal of the size indicated in the
following drawing.
2 Provide space for adequate ventilation between the wall and the display.
3 Use plate metal having sufficient strength (with a safety factor of approximately four), and attach at four points (4-
point mounting) as shown below. Since wall installations involve certain hazards, always follow double-safety
procedures.
4 The following table lists proper operating temperatures. Use the display within the listed range of outside air
temperature.
5 Keep deformation of the display to 1 mm, including twisting and bending.
50mm
50mm
75mm 75mm
Clearance A to the wall
Less than 50 mm
50 mm or more
* The same conditions apply to the working temperature requirements for a speaker system (PDP-S03-LR).
2 6
Do not block this area at either the top or bottom.
694 mm (center indicated)
VIDEO Machintosh (66.7Hz)
0~35°C
0~40°C
75mm 75mm
PC-9800 (56.4Hz)
PC-9800 (70.1Hz)
VGA (72.8Hz, 75Hz)
VGA (60Hz)
0~35°C Not usable
0~40°C 0~35°C
Wall
A