Installation Under The Floor - Pioneer PDM-4001 Technical Manual

Special installation (Installation under the floor)

3.4.11 Installation under the floor

• If protective glass or similar material is used, the following installation conditions must be observed:
Floor
Exhaust
B
A + 50 mm
Exhaust fan
or l e ss
Exhaust port
60 mm
or l e ss
B
| Looking in the direction of the arrow (see the next page)
If the display is used in the closed space, observe the following conditions in the above environment:
Without exhaust fan
With exhaust fan
5 4
C
C
A
Exhaust
Flow of air from the air conditioner
A ≥ 20 mm (clearance between the protective glass and PDP)
B ≥ 100 mm (clearance between the PDP and side wall)
C ≥ 50 mm (clearance between the PDP and side wall)
D ≥ 290 mm (clearance between the surface of the PDP and the mounting surface under
the floor)
E ≥ D – 65 mm
F ≥ 180 mm
G ≥ 600 mm
VIDEO
0~30°C
0~35°C
Protective glass surface
Intake
B
Tempered glass, etc. (permeable)
A + 50 mm
50mm
or l e ss
60 mm or
less
B
PC-9800 (56.4Hz)
Machintosh (66.7Hz)
VGA (60Hz)
0~30°C
0~35°C
C
G
F
C
E
D
Intake port
PC-9800 (70.1Hz)
VGA (72.8Hz, 75Hz)
Not usable
0~35°C