Pioneer PDM-4001 Technical Manual page 143

Table of Contents

Advertisement

Performing adjustments on the plasma display operation panel
Remote control
SET
P I CTURE PARAMETER
Main unit
SET
Remote control
1
P I CTURE PARAMETER
2
Main unit
P I CTURE PARAMETER
ADJUST
• Only in the NTSC mode
Remote control
MENU
• Returns to the normal screen.
Main unit
MENU
CONTRAST
: ADJ.
SET : EXIT
CONTRAST
: ADJ.
SET : EXIT
T I NT
: ADJ.
SET : EXIT
and remote control
Finalize your choice.
Make adjustments for each item as follows:
CONTRAST ........ Adjusts the contrast of the picture
according to the brightness of the
environment so that you can watch
the picture easier.
BRIGHT ............... Adjusts the brightness of the picture
so that you can watch the darker
parts of the picture, (such as night
scenes and dark hair), easier.
COLOR ................ Adjusts the color of the picture as
desired. (Set it to a little lower posi-
tion than that you want, to obtain
natural pictures.)
TINT .................... Adjusts the tint of the picture so that
the face color looks natural.
(Possible to adjust when the NTSC
signal is inputted.)
SHARPNESS ...... Normally set to their center values.
But if you want images to be dis-
played in softer tones, adjust it to the
left from the center position.
INIT ..................... Returns the above picture settings
to their center values. *1
* 1
When you select INIT. , the message on the right is displayed.
Select "YES" or "NO" by using the 2 or 3 button.
Selecting "YES" and pressing the SET button sets back all
picture quality settings to their default values.
When "NO" is selected, all settings will remain as they are.
If "NO" has been selected, SET:EXIT
will be displayed here.
If "YES" has been selected, SET:INIT
will be displayed.
Adjust the picture quality concerning
the selected item.
1 In case of the items other than TINT:
2 In case of TINT:
To return to the step-2 screen, press the SET button.
Repeat Steps 2 through 4 to adjust the other items.
When you have completed the setting,
return to the normal screen.
P I CTURE PARAMETER
I N I T I AL I ZE?
YES
NO
SET : EX I T
143

Advertisement

Table of Contents
loading

Table of Contents