Pioneer PDM-4001 Technical Manual page 104

Mounting standard metal fixtures (PDM-4001)
Dimension of base plates for one column of two units and one column of three units when not fixed to the
floor)
(In case of two columns or more, this is not necessary)
When fixing the base plates on the floor, using the multiple installation fixtures for one column of two units and two
columns of three units, read the values indicating the side direction (size: 910) in Figure 4.11.5-3) as 919 + 2D and 919
+ 2E, respectively (See Figure 4.11.5-5).
Reference)
Use the D and E values in Figure 4.11.5-6)
However, the upper limit of the cradle height should be 1500 mm.
D
919 D E
E
919
For one column of two units For one column of two units
Figure 4.11.5-5)
104