Set Your Appliance To On - Atag CM4585M Instructions For Use Manual

The appliance goes to standby automatically. It is now ready for normal use.
WARNING!
Danger! Risk of burns.
During rinsing, a little hot water flows out of the coffee spouts. Avoid contact with splashes of
water. Do not let the appliance stay unattended while hot water is being supplied.

Set your appliance to On'

The appliance is ready to use if it has reached the correct temperature.
The primary screen is shown.
NOTE!
Each time the appliance is set to On', it performs an automatic preheat and rinse cycle. This
cycle cannot be interrupted. The appliance is ready for use only after the completion of this cycle.
TIP!
Put a cup under the spouts. Collect the hot water from the rinse cycle to warm the cup.
NOTE!
Do not push the main switch while the appliance is set to On'.
Operation
15