Installation; Safety - Atag CM4585M Instructions For Use Manual

Installation

Safety

WARNING!
If the safety instructions and warnings are not followed, the
manufacturer cannot be held responsible for any resulting damage.
• After removing the packaging, make sure the product is complete
and undamaged. If in doubt, do not use the appliance and contact
a qualified professional.
• Installation must be carried out by a qualified technician and in
compliance with current regulations.
• Packing elements (plastic bags, polystyrene etc.) must not be left
within reach of children as they may represent a hazard.
• Never install the appliance in environments where the temperature
may reach 0 °C or lower (the appliance may be damaged if the
water freezes).
• Make sure the mains voltage corresponds to the voltage indicated
on the appliance rating plate. Connect the appliance to an
efficiently earthed socket. The manufacturer may not be
considered liable for possible incidents caused by the failure to
adequately earth the mains.
• Make sure the socket used is freely accessible at all times,
enabling the appliance to be unplugged when necessary.
• Never touch the plug with damp hands.
• Never pull the power cable as you could damage it.
• This appliance can be installed over a built-in oven if the latter is
fitted with a cooling fan.
• Do not use multiple plug adapters or extension leads.
• The power cable on this appliance must not be replaced by the
user as this operation requires the use of special tools. If the cable
is damaged or requires replacing, contact an authorised service
centre only to avoid all risks.
• You should personalise water hardness as soon as possible
following the instructions.
40