Set Your Appliance To 'On - Atag CM4574M Instructions For Use Manual

OPERATION
The appliance goes to standby automatically. It is now ready for normal use.
Danger of burns
During rinsing, a little hot water flows out of the coffee spouts. Avoid contact with splashes
of water. Do not let the appliance stay unattended while hot water is being supplied.

Set your appliance to 'On'

The appliance is ready to use if it has reached the correct temperature.
The primary screen is shown.
Attention
Each time the appliance is set to 'On', it performs an automatic preheat and rinse cycle.
This cycle cannot be interrupted. The appliance is ready for use only after completion of this
cycle.
EN 14