Atag CM4585M Instructions For Use Manual page 22

Settings
Table continued from last page
22
Coffee temperature
Adjust the temperature of the water that is used to make coffee.
Water hardness
See chapter Maintenance'.
Set language
Adjust the language shown on the display.
Beep
Set the beep on or off.
• You hear a beep every time you touch a key and when you insert/remove an
accessory.
Lighting
Set the lighting on or off.
• The cup lighting comes on each time a beverage is supplied and during each
rinse cycle.
Background
Set the colour of the display background.
Demo mode
Start the demo mode to show the main functions.
• To exit the demo mode, set your appliance to Standby'.
Default values
Reset all menu settings and programmed quantities back to the default values (with
the exception of the language).
Statistics
Show statistics relating to the appliance.