Replace A Water Softener Filter; Remove A Water Softener Filter; Clean The Brewing Unit/Infuser Once A Month - Atag CM4585M Instructions For Use Manual

Table of Contents

Advertisement

The water filter symbol is shown on the display adjacent to the time. This indicates that the filter has
been enabled.

Replace a water softener filter

Replace the filter when the related message is shown on the display.
To replace the filter immediately, read and obey the instructions shown on the display.
To replace the filter later, touch the escape key.
-
A symbol is shown on the display to remind you that the filter needs to be replaced.
TIP!
Take a look at the pictures in the previous section on how to install the filter.
NOTE!
After two months (see date indicator) or when the appliance has not been used for 3 weeks, you
should replace the filter even if the message has not been displayed yet.

Remove a water softener filter

If you want to use the appliance without the filter, you must remove it and notify the appliance of its
removal.

Clean the brewing unit/infuser once a month

WARNING!
Do not remove the brewing unit when the appliance is set to On'. Set the appliance to
Standby'. Do not use force to remove the brewing unit.
Do not use washing-up liquid to clean the brewing unit. It would remove the lubricant applied
to the inside of the piston.
Maintenance
31

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cm4574m

Table of Contents