Table of Contents
Advertisement
Operation
Set your appliance to Standby' and Off'
NOTE!
Each time the appliance is set to Standby' after being used to make coffee, it performs an
automatic rinse cycle.
TIP!
•
If you do not use the appliance for a long period, set the appliance to Off'.
•
To disconnect the appliance completely, place the main switch on the side of the appliance
in the 0 (off) position.
Important tips and tricks when you make coffee
•
The supply of coffee can be stopped at any moment.
•
As soon as the supply has ended, you can increase the quantity of water.
•
You can customise beverages.
•
Adjust the grind level if the coffee is supplied a drop at a time or too weak and not creamy
enough.
•
Make a hotter coffee:
-
Perform a rinse cycle and warm the cups with the hot water from the rinse cycle.
-
Supply hot water to warm the cups.
-
Use the cup warmer setting to warm the cups.
-
Increase the coffee temperature.
•
Lower the spouts to the cup as near as possible. This makes the coffee more creamy.
•
After the coffee supply, the aroma setting and the quantity setting are reset to the original recipe'.
•
Once a beverage has been made, the appliance is ready to make the next beverage.
Make coffee using coffee beans
NOTE!
Do not use green, caramelised or candied coffee beans. They could make the coffee mill unusable.
16
Advertisement
Table of Contents
