Clean The Internal Tubes Of The Milk Container And The Nozzle - Atag CM4585M Instructions For Use Manual

Maintenance
HOT SURFACE!
Wait a few minutes for the hot water spout to cool down.
NOTE!
Wash all parts of the spout thoroughly with a sponge and warm water.

Clean the internal tubes of the milk container and the nozzle

Each time a milk-based hot drink is supplied, the display shows a CLEAN message. Put an empty
cup under the milk spout before you obey this instruction shown on the display. Let the milk container
stay in the appliance (you do not need to empty it).
WARNING!
Danger! Risk of burns.
When cleaning the internal tubes of the milk container, a little hot water and steam leak out of the
frothed milk spout. Avoid contact with splashes of water.
The cleaning stops automatically.
Any milk residues are removed now.
24