Mount The Switch; Rack Or Cabinet Mounting - HP ProCurve 224 Installation Manual

Installing the Switch 212M and 224M
Installation Procedures

4. Mount the Switch

After you have verified that the switch passes self test, you are ready to power
it off and mount the switch in a stable location. The Switch 212M/224M can
be mounted in a variety of ways:

Rack or Cabinet Mounting

The Switch 212M/224M is designed to be mounted in any EIA-standard 19-inch
telco rack or equipment cabinet.
C a u t i o n
For safe operation, please read the Installation Precautions on page
2-3 before mounting a switch.
1.
.
10 mm
M4 screws
2-8
in a rack or cabinet
on a wall
on a horizontal surface
Use a #1 Phillips (cross-head) screwdriver and attach the mounting
brackets to the switch with the included 10-mm M4 screws.