Table of Contents
Advertisement
2 .
G E N E R A L D E S C R I P T I O N
The CHRISTIE P35GPS Projector, manufactured exclusively by CHRISTIE DIGITAL
SYSTEMS in Cypress, California, is a dual-lens 35mm movie projector that employs a
revolutionary sealed-bearing intermittent movement called the Ultramittent©. This
movement coupled with uncompromising design and assembly workmanship, results in the
finest possible theater picture reproduction. The Ultramittent movement is standard on all
CHRISTIE projectors.
2.1.
O
P T I O N A L
Options available for enhancing the standard features of the P35GPS projector include:
• manual dual-lens turret
• automatic dual or triple lens turret, including automatic aperture changer
• inboard Dolby digital reader
• all models available in 50 Hz or 60 Hz
2.2.
S
P E C I F I C A T I O N S
Standard specifications for the P35GPS projector family are listed in the Table shown in
Figure 2-1, below.
POWER REQUIREMENTS:
Input Voltage
DIMENSIONS:
Height
Width
Depth
:
WEIGHT
FILM SPEED:
OPERATING TEMPERATURE:
MOTOR:
These specifications may vary slightly, depending upon the particular model and options
chosen.
CHRISTIE DIGITAL SYSTEMS P35GPS Projector
March, 2004
2-1
F
E A T U R E S
115 VAC, 5 Amp, 60 Hz
OR
220 VAC, 3 Amp, 50 Hz
23 inches
18 inches
16 inches
Standard: approximately 90 lb.
Standard: 24 frames/sec (90 ft/min)
0 to +45°C
Synchronous split phase, 1800 rpm, 60 Hz
OR
1500 rpm, 50 Hz
Figure 2-1: Table of Equipment Specifications
2
Advertisement
Table of Contents
