Table of Contents
Advertisement
Using Basic Projector Features
Indicators
When set to Off, you can turn off the indicator lights on the projector.
Execution Method
Extended > Operation > Advanced > Indicators
s
Date & Time
You can adjust the projector's system time and date settings.
Execution Method
Extended > Operation > Date & Time
s
Language
You can select the language for projector menu and message displays.
Execution Method
Extended > Language
s
On-Screen Display
You can display or hide the menus or messages on the projected image. Make
sure you assign On-Screen Display to any [User] button on the remote
control in the Settings menu.
Settings > User Button
s
Execution Method
Press the [User] button on the remote control to which On-Screen Display is
assigned.
• Menus and messages are displayed or hidden each time you press the
button.
a
• If On-Screen Display is enabled, you cannot operate the projector's
menu (except to switch the color mode and input source).
Energy Saving Mode
When set to On, you can reduce the power consumption by automatically
adjusting the light source brightness. The light source brightness is gradually
adjusted over a period of 60 minutes and it does not ruin the image
appearance.
When you use the Multi-Projection or Constant Brightness features, set to
Off to correct differences in the brightness between projectors.
Execution Method
Settings > Brightness Settings > Energy Saving Mode
s
This function is disabled in the following cases:
• When Edge Blending is set to Blending/Black Level or Black Level.
a
s Extended > Multi-Projection > Edge Blending
• When Color Mode is set to Multi-Projection.
s Image > Color Mode
• When Light Source Mode is set to Custom.
s Settings > Brightness Settings > Light Source Mode
54
Advertisement
Table of Contents
