Table of Contents
Advertisement
Laser Safety Information
This projector is a Class 1 laser product that complies with the IEC/EN60825-
1:2014 international standard for lasers.
Follow these safety instructions when using the projector.
Warning
• Do not open the projector's case. The projector contains a high-powered laser.
• Possibly hazardous optical radiation emitted from this product. Do not look at
operating light source. Eye injury may result.
• Do not expose the light from the projector to optical devices, such as a
magnifying glass or reflectors. Continuing to use the projector in this condition
could cause viewers to feel unwell. It could also cause a fire or accident.
• As with any bright source, do not stare into the beam, RG2 IEC/EN 62471-
5:2015.
• This projector may become RG3 when an interchangeable lens with a throw
ratio greater than 2.2 is installed. Refer to the lens list and hazard distance before
operation. Such combinations of projector and lens are intended for professional
use only, and are not intended for consumer use.
• Operators shall control access to the beam within the hazard distance or install
the product at a height that will prevent eye exposure within the hazard distance.
• No direct exposure to the beam shall be permitted.
Caution
Do not disassemble the projector when disposing of it. Dispose according to your
local or national laws and regulations.
The projector uses a laser as the light source. The laser has the
following characteristics.
• Depending on the surroundings, the brightness of the light source
a
may decline. The brightness declines a lot when the temperature gets
too high.
• The brightness of the light source declines the longer it is used. You
can change the relationship between usage time and decline in
brightness settings.
g g Related Links
• "Laser Warning Labels"
p.188
Laser Warning Labels
Laser warning labels are attached on the projector. The labels may vary
depending on the country or area of purchase.
Inside
188
Advertisement
Table of Contents
