Lens Calibration; A/V Settings; Standby Mode; Hdbaset - Epson EB-PU2116B User Manual

Extended Menu
When you set Schedule Protection to On in the Password Protection
screen, you cannot change the time and date settings. Set Schedule
Protection to Off first.
a

Lens Calibration

Extended > Operation > Lens Calibration
s
You can view information about the lens currently in use.
It takes up to approximately 100 seconds. When calibration is finished, the
lens returns to the same position it was in before calibration.
The following lenses return to the standard position.
• ELPLX02S
• ELPLX02WS

A/V Settings

Extended > A/V Settings
s
You can select to output audio and video to an external device when the
projector is in standby mode (when the power is off).
Select Always On to output audio and images to external devices when the
projector does not project any images.
• Available only when Quick Startup is set to Off, and Auto Power
On is set to Off or Computer.
a
• When set to Always On, you can move the lens position to the home
position even if the projector is in standby mode.
• When set to Always On, and Control Communication is set to On,
communication from the HDBaseT port is enabled even if the
projector is in standby mode.

Standby Mode

Extended > Standby Mode
s
Set to Communication On to monitor and control the projector over a
network.
• Set A/V Output to While Projecting first.
• Available only when Auto Power On is set to Off or Computer.
a
• Available only when USB Power is set to On While Projecting.

HDBaseT

Extended > HDBaseT
s
You can select the communication settings for connections to an HDBaseT
transmitter or switcher.
Control Communications
You can enable or disable communication from the Ethernet and serial
ports on the HDBaseT transmitter or switcher; set to On to disable the
projector's LAN, RS-232C, and Remote ports.
Extron XTP
Set to On when you connect an Extron XTP transmitter or switcher to the
HDBaseT ports. See the following Extron Web site for more details on the
XTP system.
http://www.extron.com/
• Control Communications is only displayed when Extron XTP is set
to Off.
a
• When Extron XTP is set to On, the cooling fans may run even in
standby status. This is not a malfunction.
99