Using Basic Projector Features
the image's aspect ratio. However, you can change the aspect ratio for certain
images to fit your screen.
Execution Method
• Press the [Aspect] button on the remote control.
• Change the projector's menu:
Signal > Aspect
s
If you always want to use a particular aspect ratio for a certain video
input source, you can select it using the projector's Signal menu.
a
Screen Type
You can use the Screen Type setting to match the aspect ratio of the displayed
image to the screen you are using.
Execution Method
Extended > Display > Screen > Screen Type
s
• Adjust the aspect ratio for the projected image, if necessary.
• When the Screen Type setting changes, the EDID settings are
a
automatically adjusted.
Projection
You can change the projection mode to flip the image over top-to-bottom
and/or left-to-right using the projector menus.
Execution Method
Extended > Projection
s
You can change the projection mode to flip the image over top-to-
bottom by holding down the [A/V Mute] button on the remote control
for approximately 5 seconds.
a
Test Pattern
You can display a test pattern to adjust the projected image without
connecting a computer or video device.
Execution Method
• Press the [Test Pattern] button on the control panel or remote control.
• Change the projector's menu:
Settings > Test Pattern
s
57