Table of Contents
Advertisement
GB
INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS
• Please read these operating instructions carefully before connecting your kettle to the power supply, in order to avoid
damage due to incorrect use.
• Before the first switching on check that the voltage indicated on the rating label corresponds to the mains voltage in your
house.
• Incorrect operation and improper handling can lead to malfunction of the appliance and injuries to the user.
• The appliance is intended for use only in domestic aims. The unit is not intended for industrial and commercial use, and
also for use in:
− kitchen area for the stuff of shops, offices and the other industrial places
− farm houses
− hotels, motels, rest homes and other similar places by residents.
• Do not use outdoors.
• Always unplug the appliance from the power supply before cleaning and when not in use.
• To prevent risk of electric shock and fire, do not immerse the appliance in water or any other liquids.
• The appliance is not intended for use for physically, sensory or mental disabled person (including children) or for person
with lack of life experience or knowledge, if only they are under supervision or have been instructed about the use of the
unit by responsible person.
• Children must be under control in order not to be allowed to play with the appliance.
• Do not leave the appliance switched on when not in use.
• Do not use other attachments than those supplied.
• In case of power cord is damaged, its replacement should be done by the manufacture or service department or the other
high-skill person to avoid any danger.
• Keep the cord away from sharp edges and hot surfaces.
• Do not pull, twist, or wrap the power cord around the appliance.
• When you have finished, before extracting the products and tips, unplug the appliance and wait until the motor.
• WARNING:The blades are extremely sharp and therefore dangerous. Handle with caution!
• WARNING: It is prohibited to overfill the unit or use it without ingredients. Do not exceed the continuous operating time.
• Never place hot ingredients into the bowl(> 70 ºC).
• Do not attempt to repair, adjust or replace parts in the appliance. Repair the malfunctioning appliance in the nearest
service center.
• If the product has been exposed to temperatures below 0ºC for some time it should be kept at room temperature for at
least 2 hours before turning it on.
• The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless such
changes influence significantly the product safety, performance, and functions.
• Manufacturing date is indicated on the unit and/or on packing as well as in accompanying documents in the following
format XX.XXXX where first two figures XX is the month of production, and following four figures XXXX is the year of
production.
PREPARATION FOR OPERATING
• Prior to initial use wash all removable parts with warm water with cleansing agent and dry up carefully. Wipe the outside of
the motor base with moist tissue.
• It is strongly prohibited to immerse the motor base into any liquids and/or to clean it with water.
IMMERSION BLENDER
• This unit is ideal for making cream soups, sauces and dressings, baby food, and also for blending various cocktails.
• Place the immersion blender on the motor base. To secure the accessory properly, twist it counterclockwise to align the
arrow mark on the motor base with the lock mark on the accessory.
• To prevent splashing, immerse the blender into products to be blended prior to switching it.
• To remove the beater, press the two knobs on the appliance simultaneously.
CHOPPING BLADE / MINI-CHOPPER
• Mini-chopper is ideal for chopping greenery and vegetables, cheese, majority of nuts, dried fruits. Hard products, such as
meat, onion, carrots, need to be cut before processing. Nutshells must be removed, meat must be separated from bones
and tendons.
• The chopper is not suitable for crushing ice and chopping hard products, such as coffee grains, nutmegs, cereals.
• Caution! The chopping blade is very sharp! Hold the blade by the top plastic area only!
• Place the blade on the central finger in the jar.
• Add ingredients into the jar.
• Cover the jar with the drive. Cover the jar with the drive. To fasten the drive, align the drive locks with the jar slots.
• Place the motor base into the jar drive until tightened.
• While chopping, hold the motor base with one hand, accessory jar – with the other hand.
• When finished, remove the motor base first.
• Then remove the jar drive.
• Remove the blade carefully.
• At this point you may remove chopped ingredients from the jar.
ACESSORY FOR WHISKING / LIQUID PRODUCTS BLENDING
• Use the whisk for creaming, eggbeating, desserts blending. Never use this accessory for kneading.
• Insert the accessory into adapter and place them on the motor base.
• Prior to start processing, immerse the whisk into the jar with ingredients. Start processing at low speed.
www.scarlett.ru
5
IM020
SC-HB42F49
Advertisement
Table of Contents
