Supermicro SuperServer 6039P-TXRT User Manual page 75

CPU T State Control
Custom)
Software Controlled T-States
This feature enables the software controlled T-States support. The options are Disable
and Enable
Chipset Configuration
Warning: Setting the wrong values in the following features may cause the system to malfunc-
tion.
North Bridge
This feature allows the user to configure the following North Bridge settings.
UPI Configuration

UPI Configuration
The following information will be displayed:
• Number of CPU
• Number of IIO
• Current UPI Link Speed
• Current UPI Link Frequency
• UPI Global MMIO Low Base/Limit
• UPI Global MMIO High Base/Limit
• UPI Pci-e Configuration Base/Size
Degrade Precedence
Select Topology Precedence to degrade features if system options are in conflict. Select
Feature Precedence to degrade topology if system options are in conflict. The options
are Topology Precedence and Feature Precedence.
Link L0p Enable
Select Enable for the QPI to enter the L0p state for power saving. The options are Dis-
able, Enable, and Auto.
Link L1 Enable
Select Enable for the QPI to enter the L1 state for power saving. The options are Dis-
able, Enable, and Auto.
(Available when Power Technology is set to
75
Chapter 6: UEFI BIOS