Table of Contents
Advertisement
SuperServer 6039P-TXRT User's Manual
RAID Key Header
A RAID_Key header is located at JRK1 on the motherboard. RAID key is used to support the
NVMe SSD. Please refer to the table below for the location.
NVMe SMBus Headers
NVMe SMBus (I
C) headers (JNVI
2
connections, provide hot-plug support via a dedicated SMBus interface. This feature is only
available for a Supermicro complete system with an SMCI-proprietary NVMe add-on card
and cable installed. Also, JNVI
See the table below for pin definitions.
Standby Power
The standby power header is located at JSTBY1 on the motherboard. Refer to the table
below for pin definitions.
PCI-E M.2 Slot
The motherboard has one PCI-E M.2 slot. The M.2, formerly known as Next Generation Form
Factor (NGFF) replaces a mini PCI-E slot. The M.2 allows for a variety of card sizes and offers
increased functionality and spatial efficiency. The M.2 socket on the motherboard supports
PCI-E 3.0 x4 (32 Gb/s) SSD cards in the 2260, 2280 and 22110 form factors.
RAID Key Header
Pin Definitions
Pin#
Definition
1
Ground
2
RAID_KEY_PU
3
Ground
4
PCH_RAID_KEY
C1/JNVI
C2), used for PCI-E SMBus clock and data
2
2
C1 and JNVI
C2 are VPP headers for NVMe add-on cards.
2
2
NVMe SMBus Header
Pin Definitions
Pin#
Definition
1
Data
2
Ground
3
Clock
4
VCCIO
Standby Power
Pin Definitions
Pin#
Definition
1
+5V Standby
2
Ground
3
No Connection
50
Advertisement
Table of Contents
