Save & Exit - Supermicro SuperServer 6039P-TXRT User Manual

SuperServer 6039P-TXRT User's Manual
6.8 Save & Exit
Select the Save & Exit tab from the BIOS setup screen to configure the settings below.
Save Options
Discard Changes and Exit
Select this option to quit the BIOS Setup without making any permanent changes to the
system configuration, and reboot the computer. Select Discard Changes and Exit from the
Exit menu and press <Enter>.
Save Changes and Reset
After completing the system configuration changes, select this option to save the changes
you have made. This will reset (reboot) the system.
Save Changes
When you have completed the system configuration changes, select this option to save all
changes made. This will not reset (reboot) the system.
Discard Changes
Select this option and press <Enter> to discard all the changes and return to the AMI BIOS
utility Program.
Listed on this section are other boot options for the system (i.e., Built-in EFI shell). Select an
option and press <Enter>. Your system will boot to the selected boot option.
114