Operation At High Altitudes; Usage Of The Engine; Display; Use Of Ac Alternating Current - Zipper Mowers ZI-STE2000IV User Manual

10.2.1 Operation at high altitudes

At high altitudes
carburetor air and fuel mixture will become
excessively dense, causing the decrease of the
engine's functions and function of the generator
cannot be guaranteed in the defined limits.

10.3 Usage of the engine

In order to prevent getting an electric shock because of incorrect operation, the engine
should be earthed. The earth port of the engine and the outside earth source are
connected by a thick cable.
As spare electrical source for buildings, the connection between generator and other electric
power system must be operated by professional electricians. And the operation must comply
with the related laws and electric regulations. Otherwise, the current of the engine may feed
back to the public circuit. In this case, if the workers from electric power company or other
people touch the wire when transmitting electricity, they may be shocked by electricity to death.
On the other hand, when public electricity power is stored, the engine may burn, explode, or
cause fire to the building's electric power system.
1 – Sign of grounding (Fig. P)
Do not exceed rated power, and the total watt of the connected electrical equipments
should be considered.
Do not exceed the fixed current limit of socket.
Do not link the engine to the household circuit, or else the engine or the household circuit
would be damaged.
Do not modify the engine for other unrealized purposes.

10.3.1 Display

The display changes from V, Hz, KW and hours of operation automatically.

10.3.2 Use of AC alternating current

1. Start the engine, and make sure the indicator light (green) is on.
2. Make sure that the switch of the electrical equipment to be used has been turned off,
before to plug it into the generator.
3. Start the equipment
B – Overloading indicator light (Fig. Q)
A - Low oil alarm light (Fig. Q)
C – Plug (Fig. R)

10.3.3 The outputting and overloading indicator lights

If the generator is in a good working order, the outputting indicator light (green) is on. If the
generator overloads (over 2KVA), or in case of a short circuit inside the electrical machine it links
to, the outputting indicator light (green) will turn off, while the overloading indicator light (red)
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-STE2000IV
, the standard
>1500m
The nozzle of the engine is
designed for normal altitude areas.
If it is put to use in higher altitudes,
the outputting power may decline
and become too hot, and even the
engine will be damaged seriously
because the ratio of the air and
burning fuel is too low.
2 – Ground end (Fig. P)
OPERATION
29