Using The Screen - URBANGLIDE RIDE 100XS Original Manual

1. The battery indicator shows the remaining battery level in real time.
2. To turn on the scooter, press and hold the On/Off button for 1-2 seconds. Same to turn it off.
3. Once turned on, press the On/Off button once to turn on the front light. Press the On/Off button once more to
turn it off.
4. To change the speed modes "1, 2, and 3" press the On/Off button twice briefly.
- Speed 1: maximum speed of 6 km/h
- Speed 2: maximum speed of 15 km/h
- Speed 3: maximum speed of 25 km/h
- Walk mode: Your scooter moves on its own at 3km/h.
1. Insert the handlebars into the stem without
jamming the power cables.

Using the screen

Handlebar mounting
2. Fix the handlebars with the 4 screws provided. Use the M3 spanner to
attach the handlebars to your scooter. Make sure it is secure and the
handlebars are stable before using your scooter.
9