Unfolding Steps; Using The Screen - URBANGLIDE RIDE 100S Original Manual

To unfold the scooter, you must first put the scooter upright then press on the mudguard to unhook the hook,
hold the tray, raise the handlebars to the location of the stem and close the folding/unfolding latch
CAUTION: Do not pinch your fingers when unfolding the scooter !

Using the screen

Unfolding steps

1. The battery indicator shows the remaining battery level
in real time.
2. To turn on the scooter, press the On/Off button for 1 to 2
seconds. Same for turning it off.
3. Once turned on, press the On/Off button once to turn on
before. Press once again to turn it off.
4. To change speed modes "1, 2 and 3" briefly press the
On/Off button twice.
- Speed 1: maximum speed of 6km/h | 4 mph
- Speed 2: maximum speed of 15km/h | 9 mph
- Speed 3: maximum speed of 25km/h | 15 mph
- Walk Mode: Your scooter advances alone at 3km/h |
2mph
5. To change the metric unit from KM/h to MH/h, simply
press the ON/OFF button 7 times.
27