Unfolding Steps; Using The Screen - URBANGLIDE RIDE 62R Original Manual

3. Continue bending until you hear the "click" sound.
1. Press the folding button.
2. Hold the scooter platform and raise the handlebar until you hear the "click" sound. If you have not
heard the sound, repeat and hold the folding button with your foot to make it easier to unfold.
Lights
indicator
Pedestrian
mode
Direction for pulling the scooter with the wheels
Press the folding
button
CAUTION: Do not pinch your fingers when folding the scooter!

Unfolding steps

Press the folding button

Using the screen

Speed
Speed mode
Battery level
Button
Location of the folding axis after
unfolding
1. The battery indicator shows the remaining
battery level in real time.
2. To switch the scooter on, press the On/Off
button; to switch it off, press it for 3 seconds.
3. Once the scooter is switched on, press the
On/Off button once to switch on the front light.
Press once more to turn it off.
4. Once switched on, press the On/Off button
twice to change the speed mode. When the
character is lit, this means you are in pedestrian
mode (3km/h), the "S" is not displayed, you are in
first gear, when the "S" is displayed in white, you
are in second gear, and when it is displayed in red,
you are in third gear.
21
Location of the bending
axis after bending