Unfolding Steps - URBANGLIDE RIDE 100XS Original Manual

Hide thumbs Also See for RIDE 100XS:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
1.
Turn off the scooter and put away the handle lever.
2.
Press and pull the button on the latch and fold the scooter.
3.
Continue to fold until the hook on the handlebars engages in the opening on the mudguard.
4.
You can carry your scooter with one or both hands as shown in the diagram below.
CAUTION: Do not pinch your fingers when folding the scooter!
To keep your scooter in folded mode, bring the hook on the left side of your
handlebars to the hook on the rear mudguard of your scooter.
1.
To unfold the scooter, first put the scooter on straight and then press the mudguard to release the
hook, hold the chainring, lift the handlebars to the stem position and close the folding/unfolding latch.
Folding steps

Unfolding steps

8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ride 100s

Table of Contents