Table of Contents
Advertisement
Available languages
Available languages
1.
If you feel that the brakes are too tight, please use the M5 hexagonal wrench to loosen the plate screws
on the disc brake, slide the brake cable back so that the length is slightly shorter, and then tighten the plate
screws; If you feel that the brakes are too loose, please use the M5 hexagonal wrench to loosen the plate screws
on the disc brake, slide the brake cable back so that the length is slightly longer, and then tighten the plate
screws; If you feel that the brakes are too tight, please use the M5 hexagonal wrench to loosen the plate screws
on the disc brake, slide the brake cable back so that the length is slightly longer, and then tighten the plate
screws.
2.
If the stem of the scooter shakes, please use the M5 hexagonal wrench to lock the two screws of the
folding mechanism.
3.
3. Before adjustment, make sure that the scooter is stable and secure to prevent it from tipping over.
Stem/brake maintenance
10
Advertisement
Table of Contents
