Mounting Steps - URBANGLIDE RIDE 100 CITY Original Manual

Place the handlebar kit in the steering column (image1), align the hole from the handlebar and the column
that you can put the screws for tighten it with the allen wrench provided (image 2)
TO FOLD
Raise the safety catch, then pull the stem lever,
so that the stem can be lowered (see illustration).
The hook on the head of the handlebar must be inserted into
Into the rear mudguard.
TO UNFOLD
To unfold, 1. release the hook by pressing with your hand on
the arrowed part in the illustration opposite.
2. lift the column up to the stop, 3. close the safety lever by
pushing against the steering column until it locks, make sure it
is secure before using the product.

Mounting steps

CAUTION: Care to not pinch your fingers while mounting the scooter!
2
24
1