Assembly Steps - URBANGLIDE ECROSS PRO Original Manual

In order to pull the folding
handle, you must remove the
safety device by pulling the
buckle on the right.
Adjust the size of your handlebars by
loosening the clamp on the stem. Be
careful not to exceed the height limit
indicated. Check that your handlebars are
stable and that the clamp is tight.
Unfold the handles by simply straightening them.
Check that they are stable before using your
product.

Assembly steps

Then pull the folding handle to unfold your scooter.
Straighten the stem, and raise the handlebars up. Once
you have straightened to the maximum, return the
folding handle to its original position.
To fold your scooter, pull on
the safety loop.
Then pull the folding handle and lower the
stem towards the tray of your scooter. Once
lowered to its maximum, return the safety
buckle to its original position.
To fold them, pull the two parts located on the
base of the handles. Lower the handles to the
bottom.
26
Then return the safety buckle
to its original position, and
make sure your handlebars are
stable.