Hisense BI62211CB Instructions For Use Manual page 9

Wire guides
Fixed pull-out guides
Click-on pull-out guides
(depending on the model)
In case of wire guides, always insert the wire
(grid) rack and the baking sheets into the slot
between the upper and lower part of each guide
level.
Pull-out guides may be fitted for the 2nd and
4th level.
IN case of fixed pull-out guides, place the rack
or baking sheet onto the guide. You can place
the wire rack directly onto a baking sheet
(shallow or deep all-purpose baking sheet) and
place both onto the same guide; in this case,
the baking sheet acts as a drip tray.
The click-on pull-out guide can be inserted into
any space between two wire guides.
Place the guide symmetrically onto the wire
guides on the left and the right side of the oven
cavity. First, hook the upper clip of the guide
under the wire of the wire guide. Then, press
the lower clip into the right position until you
hear a CLICK.
NOTE: The guides can be attached to any
height between two levels of wire guides.
9