Using Ipp - Oki C844 Advanced Manual

If you enable encryption, communication is encrypted immediately after the settings is
changed from the Web page.
1
Open the Web page of this machine.
Open the Web Page of This Machine
2
Log in as the administrator.
3
Select [Admin Setup].
4
Select [Network] > [Security] > [SSL/TLS].
5
Select [Enable] for the protocol to which apply the encryption.
6
Click [Submit].
Exporting a Certificate
This section describes how to export a certificate on the Web page.
For functions that communicate with SSL/TLS, a procedure to trust the exported certificate is
required on the computer.
Import the exported certificate of this machine into the trusted certificate store of the
computer to trust the certificate.
1
Open the Web page of this machine.
Open the Web Page of This Machine
2
Log in as the administrator.
3
Click [Admin Setup].
4
Select [Network] > [Security] > [SSL/TLS].
5
Select [Export Certificate] to export a certificate.
• You can export a certificate in PEM format.

Using IPP

Add this machine to your computer as an IPP printer.
If you enable IPP print, you can send print data to this machine via the Internet.
Setting This Machine as the IPP Printer in a Windows Environment
1
Open the "Printer folder" and select [Add a Printer].
2
Select [Add a network, wireless or Bluetooth printer] in the [Add Printer]
wizard.
3
Select [The printer that I want isn't] from the list of available printers.
4
Select [Select a shared printer by name].
5
Enter "http://(The IP address of this machine)/ipp" or "http://IP address of this
machine)/ipp/lp", and then click [Next].
6
Click [Have Disk].
7
Insert the "Software DVD-ROM" into the computer.
On a computer without a DVD drive, download the driver software file from the web
site, and double-click the file to decompress it.
8
Enter the following value in [Copy manufacturer's files from], and then click
[Use].
For PCL driver: "D: Drivers _PCL"
•
For PS driver: "D: Drivers PS"
•
• The above value is an example of the DVD-ROM drive is set to the D drive.
• On a computer without a DVD drive, specify the folder that was decompressed in step 7.
9
Select the INF file, and then click [Open].
10
Click [OK].
11
Select a model, and then click [OK].
- 113 -
5. Management / Setting the Printer