Initializing; Initializing Flash Memory - Oki C844 Advanced Manual

Initializing

This section describes how to initialize memory and settings saved in the machine.
You can delete data or settings stored on the printer to restore the settings to how they were
at the time of purchase.
• In order to access the [Admin Setup] menu, an administrator password is required. The default password is
"123456".
•

Initializing Flash Memory

• Initializing the Network Settings
• Initializing the Settings of the Device
Initializing Flash Memory
Flash memory stores data such as form data, etc.
Use the following steps to initialize.
• When you initialize flash memory, the following data is deleted.
- Data stored in [Shared Print] or [Private Print]
- Form data
1
Press the scroll button
«ENTER» button.
2
Enter the administrator password using the numeric (0-9) keys, and press the
«ENTER» button.
• The factory default administrator password is "123456". If the administrator password is changed, enter the
updated password.
3
Press the scroll button
button.
4
Press the scroll button
«ENTER» button.
5
Select [Initialize] or [Format Partition] and press the «ENTER» button.
6
When [Execute] is displayed, press the «ENTER» button.
• Select from 2 ways of initializing memory.
- [Initialize]: Initializes the range of open area of Flash (displayed on File List).
- [Format Partition]: Initializes user information. You can format the PCL/Common/PS partitions respectively.
7
Press the scroll button
press the «ENTER» button.
To cancel initialization, select [No] in this screen.
- 103 -
5. Management / Setting the Printer
several times to select [Admin Setup] and press the
to select [Others Setup] and press the «ENTER»
to select [Flash Memory Setup] and press the
to select [Yes] on the confirmation screen, and