Oki C844 Advanced Manual page 80

Item Factory Default
IPSec Disable
SNMP Enable
Network Scale Normal
Gigabit Network Disable
Hub Link Setting Auto Negotiate
Network Factory Defaults Execute
• USB Setup
Item Factory Default
USB Enable
Speed 480 Mps
Soft Reset Disable
Serial Number Enable
Offline Receive Disable
USB Memory Interface Enable
Connected Host Normal
• Print Setup
Item Factory
Default
Personality Auto
Copies 1
Duplex On or Off *
Binding Long Edge
Media Check Enable
A4/Letter Override Yes
Description
Displayed only when [IPSec] is enabled and only the
change to disable is available.
Sets whether to enable SNMP.
When [Normal] is selected, the printer works effectively
even if connected to a hub that has the spanning tree
feature. However, the start-up time of printer becomes
longer when the printer is connected to a small LAN that
consists of two or three computers.
Sets whether to enable access with Gigabit Ethernet.
Sets the hub linking method. Normally, select [Auto
Negotiate].
Initializing the network menu
Description
Sets eable/disable of USB I/F.
Selects the maximum transfer speed of USB interface.
Sets Enable/Disable of Soft Reset command.
Specifies Enable/Disable of a USB serial number.
Sets whether to receive data when an alarm is present.
(Except C824)
Sets eable/disable of USB Memory I/F.
To prevent a timeout error occurring when a job is sent to
the machine in sleep mode, set to [Specific].
That requires more energy during sleep mode than the
[Normal] mode.
Description
Selects the emulation mode.
Sets the number of copies.
1 Sets the duplex printing.
Sets the binding position for duplex printing.
Sets whether to check if the paper size of the tray and
the page size of the document do not match.
Automatically switches paper to print from A4 to Letter if
A4 document is to be printed with A4 paper run out and
Letter paper loaded, from Letter to A4 if Letter document
is to be printed with Letter paper run out and A4 paper
loaded.
Item
Resolution
Toner Save Toner Save
Level
Color
Mono-Print Mode
Default Orientation
Edit Size
Trapping
X Dimension
Y Dimension
*1 : Factory default setting values are different according to the country or region.
• PS Setup (C834/C844/ES8434)
Item Factory Default
L1 Tray Type1
Network Protocol RAW
USB Protocol RAW
PDF Paper Size Current Tray Size
PDF Scaling Size 99 %
PDF Print Mode Quality priority
• PCL Setup
Item
Font Source
Font Number
- 80 -
5. Management / Setting the Printer
Factory Description
Default
600 dpi Sets the resolution.
Off Sets the amount of toner to be saved.
All [All]: Toner Save is applied to all colors including 100%
black.
[Except100%Black]: Toner Save is applied to all colors
other than 100% black.
This function is only applied to the print function.
Auto Sets the print mode for black-and-white pages.
Portrait Sets the print orientation. Not available for PS data.
Cassette Size Sets the size of the printable page area when no
command to specify the paper edit size is sent from the
computer.
Off Sets when white stripes appear between adjacent colors.
210 millimeter Sets the width of a custom paper size.
or 8.5 inch * 1
297 millimeter Sets the length of a custom paper size.
1
or 11.0 inch *
Description
Sets the paper tray number for the Level 1 operator
command.
Specifies PS communication protocol mode of data from
Network.
Specifies PS communication protocol mode of data from
USB.
Set the paper size when printing PDF files.
Sets reduction rate for PDF when [PDF Paper Size] is
set to [Scaling Size].
Sets whether to give priority to the print quality or the
print speed when printing PDF.
Factory Description
Default
Resident Selects the location of the font to use.
I0 Selects the font number to use.