Oki C844 Advanced Manual page 81

Item Factory
Default
Font Pitch 10.00 CPI
Font Height 12.00 point
Symbol Set PC-8
A4 Print Width 78 column
White Page Skip Off
CR Function CR
LF Function LF
Print Margin Normal
True Black Off
Pen Width Adjust On
Tray ID# MPTray 4
Tray1 1
Tray2 5
Tray3 20
Tray4 21
Tray5 22
Description
Sets the width of the PCL default font. Available range:
0.44 to 99.99 CPI. (0.01 CPI increments)
Sets the height of the PCL default font. The height is
displayed to two decimal points (at 0.25 point intervals).
Selects a PCL symbol set.
Sets the number of columns for automatic line feed on
A4 paper for PCL. The number of columns is based on
when the font pitch is 10CPI and the Auto CR/LF mode is
set to off.
Sets whether to eject a blank page when an FF
command (0CH) is received in PCL.
Sets the printer operation when a CR code is received in
PCL.
Sets the printer operation when a LF code is received in
PCL.
Sets the non-printable area of page.
PCL: Sets whether to use composite black (CMYK
mixed) or true black (K only) for the 100% black area of
an image.
When the minimum line width is specified in PCL, a 1 dot
line may look like a broken line. This mode adjusts fine
lines so that they look like solid lines.
Sets a number of MP tray for the paper feed destination
command (ESC&l#H) in PCL5 emulation.
Sets a number of tray 1 for the paper feed destination
command (ESC&l#H) in PCL5 emulation.
Sets a number of tray 2 for the paper feed destination
command (ESC&l#H) in PCL5 emulation.
This menu is displayed only when the tray 2 is installed.
Sets a number of tray 2 for the paper feed destination
command (ESC&l#H) in PCL5 emulation.
This menu is displayed only when the tray 3 is installed.
Sets a number of tray 2 for the paper feed destination
command (ESC&l#H) in PCL5 emulation.
This menu is displayed only when the tray 4 is installed.
Sets a number of tray 2 for the paper feed destination
command (ESC&l#H) in PCL5 emulation.
This menu is displayed only when the tray 5 is installed.
• SIDM Setup
Item Factory Default
SIDM Manual ID# 2
SIDM Manual2 ID# 3
SIDM MP Tray ID# 4
SIDM Tray1 ID# 1
SIDM Tray2 ID# 5
SIDM Tray3 ID# 6
SIDM Tray4 ID# 7
SIDM Tray5 ID# 8
• IBM PPR Setup
Item Factory Default
Character Pitch 10 CPI
Font Condense 12 CPI to 20 CPI
Character Set SET-2
Symbol Set IBM-437
Letter O Style Disable
Zero Character Normal
Line Pitch 6 LPI
White Page Skip Off
CR Function CR
LF Function LF
Line Length 80 Column
Form Length 11.7 inch or 11 inch *
TOF Position 0.0 inch
Left Margin 0.0 inch
- 81 -
5. Management / Setting the Printer
Description
Sets up Pn specified in MANUAL by MANUAL-1 ID
No.FX/PPR Emu in CSF control command (ESC EM
Pn).
Sets up Pn specified in MANUAL by MANUAL-2 ID
No.FX/PPR Emu in CSF control command (ESC EM
Pn).
Sets up Pn specified TRAYO (MP Tray) by MP Tray ID
No.FX/PPR Emu in CSF control command (ESC EM
Pn).
Sets up Pn specified TRAY 1 by Tray 1 ID No.FX/ PPR
Emu in CSF control command (ESC EM Pn).
Sets up Pn specified TRAY 2 by Tray 2 ID No.FX/ PPR
Emu in CSF control command (ESC EM Pn).
Sets up Pn specified TRAY 3 by Tray 3 ID No.FX/ PPR
Emu in CSF control command (ESC EM Pn).
Sets up Pn specified TRAY 2 by Tray 2 ID No.FX/ PPR
Emu in CSF control command (ESC EM Pn).
Sets up Pn specified TRAY 2 by Tray 2 ID No.FX/ PPR
Emu in CSF control command (ESC EM Pn).
Description
Specifies character pitches in IBM PPR emulation.
Specifies 12CPI pitches for Condense Mode.
Specifies a character set.
Specifies a symbol set.
Specifies the style that replaces 9BH with letter o and
9DH with a zero.
Sets the zero to be slashed or unslashed.
Specifies the line spacing.
Selects whether to print blank pages.
Selects a carriage return from [CR] or [CR+LF].
Selects a line feed from [LF] or [LF+CR].
Specifies the number of characters per line.
1 Specifies the length of paper.
Specifies the distance from the top edge of paper.
Specifies the distance from the left edge of paper so that
the print starting point shifts to the right horizontally.