Table of Contents
Advertisement
An ideal mounting place for the Thermo-hygro transmitter would be the outer wall
beneath the extension of a roof, as this will protect the transmitter from direct sunlight
and other extreme weather conditions.
To wall mount, use the 2 screws to affix the wall bracket to the desired wall, plug in
the Thermo-hygro transmitter to the bracket and secure both parts by the use of the
supplied screws and ensure that the cables from the wind and rain sensors are
correctly plugged in otherwise data transmission errors could occur.
Wind Sensor
Wind vane
Horizontal
panel
Wind fan
51
Vertical
mast
Advertisement
Table of Contents
