Table of Contents
Advertisement
STORM WARNING THRESHOLD VALUE SETTING
You may also define a switching sensitivity value for the Storm warning display at a
decrease of air pressure from .09 inHg (3 hPa) to .27 inHg (9 hPa) over 6 hours
Default 0.15 inHg (3 hPa).
Flashing
1.
The sensitivity value will start flashing.
2.
Use the + or MIN/MAX key to select the value.
3.
Confirm with the SET key and enter the STORM ALARM ON/OFF SETTING.
STORM ALARM ON/ OFF SETTING
You may also choose to switch On or Off the acoustic Storm warning alarm (Default
OFF).
1.
The digit "AOF" will start flashing.
2.
Use the + key to switch On or Off the alarm. ("AOF" = OFF; "AON" = On)
3.
Confirm with the SET key and the normal display mode will be shown.
23
Advertisement
Table of Contents
