Table of Contents
Advertisement
RAINFALL UNIT SETTING
The total rainfall unit can be set as inch or mm. The default unit is inch.
1.
Use the + or MIN/MAX key to toggle between the unit "inch" or "mm"
2.
Confirm the unit with the SET key and enter the RELATIVE AIR PRESSURE
UNIT SETTING
RELATIVE AIR PRESSURE UNIT SETTING
The relative air pressure can be set as inHg or hPa. The default unit is inHg.
1.
Use the + or MIN/MAX key to toggle between the unit "inHg" or "hPa"
2.
Confirm the unit with the SET key and enter the RELATIVE PRESSURE
REFERENCE VALUE SETTING.
Flashing
Flashing
20
Advertisement
Table of Contents
