Delta Electronics VFD-M Series User Manual page 53

Chapter 4 Parameters|
Output signal for Over-torque
Applications
Pumps, fans and
extruders
Output Signal for Low Voltage
Applications
General application
Output Signal at Desired Frequency
Applications
General application
Output Signal for Base Block
Applications
General application
Overheat Warning for Heat Sink
Applications
General application
4-18
Purpose
To protect
machines and to
have continuous/
reliable operation
Purpose
Provide a signal for
running status
Purpose
Provide a signal for
running status
Purpose
Provide a signal for
running status
Purpose
For safety
Functions
When over-torque is detected, a
signal is given to prevent machines
from damage.
Functions
When low voltage is detected, a signal
is given for external system or control
wiring.
Functions
When the output frequency is at the
desired frequency (by frequency
command), a signal is given for
external system or control wiring
(frequency attained).
Functions
When executing Base Block, a signal
is given for external system or control
wiring.
Functions
When heat sink is overheated, it will
send a signal for external system or
control wiring.
Parameters
Parameters
Parameters
Pr.45~Pr.46
Parameters
Parameters
Revision May 2008, ME14, SW V3.04
Related
Pr.45
Pr.46
Pr.61
Pr.62
Related
Pr.45
Pr.46
Related
Pr.47
Related
Pr.45
Pr.46
Related
Pr.45
Pr.46