Delta Electronics VFD-M Series User Manual page 158

Display Message
B.7.3 Operation Flow Chart
Revision May 2008, ME14, SW V3.04
The specified parameter setting.
The actual value stored in the specified parameter.
External Fault
"End" displays for approximately 1 second if the entered input data
have been accepted. After a parameter value has been set, the
new value is automatically stored in memory. To modify an entry,
use the
"Err" displays if the input is invalid.
Communication Error. Please check the AC motor drive user
manual for more details.
VFD-PU06 Operation Flow Chart
XX
XX-XX
XXXXX
-ERR-
Cannot
write in
Appendix B Accessories|
Descriptions
or keys.
-END-
Succeed to
Write in
Or
Press UP key to select
SAVE or READ.
Press PROG/DATA for
about 2 seconds or until
it is flashing, then save
parameters from PU06 to
AC drive or read parameters
from AC drive to PU06 .
B-13