Spare Parts Recommendation; Accessories; Extract From The Lubricants Table; Decommissioning - GEA HG7 Series Assembly Instructions Manual

Bock compressor
Hide thumbs Also See for HG7 Series:
Table of Contents

Advertisement

7| Maintenance
7.3 Spare part recommendation
HG7 / ...
Designation
Set of gaskets
Valve plate kit
Set piston/connecting rod
Set connecting rod
Oil pump set
Oil sump heater set 230 V ~
Only use genuine Bock spare parts!

7.4 Accessories

Available accessories can be found on the Internet at www.bock.de.

7.5 Extract from the lubricants table

D
The oil type filled as standard in the factory is marked on the name plate . This oil type should be
GB
used as a preference. Alternatives are stated in the extract from our lubricants table below.
F
Refrigerants
E
HFC
(e.g. R134a/R407C)
HCFC (e.g. R22)

7.6 Decommissioning

Close the shut-off valves on the compressor. Drain the refrigerant (it must not be discharged into the
environment) and dispose of it according to the regulations. When the compressor is depressurised,
undo the fastening screws of the shut-off valves. Remove the compressor using an appropriate hoist.
Dispose of the oil inside in accordance with the applicable national regulations.
26
1620-4 (S)
Item No.
08995
Bock standard oil types
Fuchs Reniso Triton SE 55
Fuchs Reniso SP 46
1860-4 (S)
2110-4 (S)
Item No.
80094
08498
08996
08306
80116
08426
Recommended alternatives
Fuchs SEZ 32
ICI Emkarate RL 46 S
Mobil Arctic AL 46
Shell Clavus R 46
Mobil SHC 425
Shell Clavus SD 22-12
Sunoil Suniso 4GS
Texaco Capella WF 46
Item No.
80112

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hg7/1620-4Hg7/1860-4Hg7/2110-4Hg7/1620-4 sHg7/1860-4 sHg7/2110-4 s ... Show all

Table of Contents