Spare Parts Recommendation; Accessories; Extract From The Lubricants Table; Decommissioning - GEA HG4/310-4 Assembly Instructions Manual

7| Maintenance
7.3 Spare part recommendation
HG4 / ...
Designation
Set of gaskets
Valve plate kit
Oil pump kit
Oil sump heater kit
230 V ~
Only use genuine GEA Bock spare parts!

7.4 Accessories

Available accessories can be found on the Internet at www.gea.com

7.5 Extract from the lubricants table

D
The oil type filled as standard in the factory is marked on the name plate . This oil type should be
GB used as a preference. Alternatives are stated in the extract from our lubricants table below.
F
Refrigerants
E
HFC
I
(e.g. R134a/R407C)
Ru
HCFC (e.g. R22)

7.6 Decommissioning

Close the shut-off valves on the compressor. Drain the refrigerant (it must not be discharged into the
environment) and dispose of it according to the regulations. When the compressor is depressurised,
undo the fastening screws of the shut-off valves. Remove the compressor using an appropriate hoist.
Dispose of the oil inside in accordance with the applicable national regulations.
26
310-4 (S)
Ref. No.
08888
GEA Bock standard oil types
Fuchs Reniso Triton SE 55
Fuchs Reniso SP 46
385-4 (S)
465-4 (S)
Ref. No.
08913
08247
08384
08425
Recommended alternatives
Fuchs Reniso Triton SEZ 32
Esso/Mobil EAL Arctic 46
Sunoco Suniso SL 46
Texaco Capella HFC 55
Fuchs Reniso SP 32
BP Energol LPT 46
Sunoco Suniso 3,5 GS
Texaco Capella WF 46
555-4 (S)
650-4 (S)
Ref. No.
08248