Ambient Weather WS-2902B User Manual page 12

1. Remove the battery door on the back of the transmitter(s) by sliding down the battery door, as
shown in Figure 9 .
2. BEFORE inserting the batteries, locate the dip switches on the inside cover of the lid of the
transmitter.
3. Channel Number: The WS-5000 supports up to eight transmitters.. To set each channel
number (the default is Channel 1), change Dip Switches 1, 2 and 3, as referenced in Figure
10.
4. Temperature Units of Measure: To change the transmitter display units of measure (°F
vs. °C), change Dip Switch 4, as referenced in Figure 10.
Switch in down position.
Version 2.0 ©Copyright 2020, Ambient LLC. All Rights Reserved.
Figure 9
Switch in up position.
Page 12