Table of Contents
Advertisement
Placing Originals
>
Note:
❏ If there is any trash or dirt on the scanner glass, the scanning range may expand to include it, so the image of the original
may be displaced or reduced. Remove any trash and dirt on the scanner glass before scanning.
❏ A range of 1.5 mm from the corner of the scanner glass is not scanned.
❏ When originals are placed in the ADF and on the scanner glass, priority is given to the originals in the ADF.
❏ Some sizes may not be automatically detected. In this situation, manually select the size of the originals.
❏ If you leave the originals on the scanner glass for a long time, they may stick to the surface of the glass.
When using the ADF
Important:
c
❏ Do not load originals above the line indicated by the triangle symbol on the ADF edge guide.
❏ Do not add originals while scanning.
Note:
Some sizes may not be automatically detected. In this situation, manually select the size of the originals.
Related Information
"Originals that are not Supported by the ADF" on page 36
&
"Detecting the Original Size Automatically" on page 36
&
"Scanner Specifications" on page 346
&
Placing Originals
38
Advertisement
Table of Contents
