Table of Contents
Advertisement
Product Information
❏ Font Number
Select the default font number for the default Font Source. The available number varies
depending on the settings you made.
❏ Pitch
Set the default font pitch if the font is scalable and of fixed-pitch. You can select from 0.44 to
99.99 cpi (characters per inch), in 0.01 increments.
This item may not appear depending on the Font Source or Font Number settings.
❏ Height
Set the default font height if the font is scalable and proportional. You can select from 4.00
to 999.75 points, in 0.25 increments.
This item may not appear depending on the Font Source or Font Number settings.
❏ Symbol Set
Select the default symbol set. If the font that you selected in the Font Source and the Font
Source setting is not available in the new symbol set setting, the Font Source and the Font
Number settings are automatically replaced with the default value, IBM-US.
❏ Form
Set the number of lines for the selected paper size and orientation. This also causes a line
spacing (VMI) change, and the new VMI value is stored in the printer. This means that later
changes in the page size or orientation settings cause changes in the Form value based on
the stored VMI.
❏ CR Function
Select the line feed command when printing with a driver from a specific operating system.
❏ LF Function
Select the line feed command when printing with a driver from a specific operating system.
❏ Paper Source Assign
Set the assignment for the paper source select command. When 4 is selected, the commands
are set as compatible with the HP LaserJet 4. When 4K is selected, the commands are set as
compatible with the HP LaserJet 4000, 5000, and 8000. When 5S is selected, the commands
are set as compatible with the HP LaserJet 5S.
PS Menu:
❏ Error Sheet
Select On to print a sheet showing the status when an error occurs during PostScript or
PDF printing.
❏ Coloration
Select the color mode for PostScript printing.
❏ Binary
Select On when printing data that contains binary images. The application may send the
binary data even if the printer driver setting is set to ASCII, but you can print the data when
this feature is enabled.
❏ PDF Page Size
Select the paper size when printing a PDF file. If Auto is selected, the paper size is
determined based on the size of the first page.
>
>
Settings Menu List
General Settings
323
Advertisement
Table of Contents
