Table of Contents
Advertisement
Administrator Information
❏ Auto Error Solver
Set whether to automatically cancel the error if there is no operation on the control panel for 5 seconds
after displaying the error.
3. Check the settings, and then click OK.
Setting Universal Print
Set when you print from external devices without using the printer driver.
Some items are not displayed depending on the printing language of your printer.
1. Access Web Config and select the Print tab > Universal Print Settings.
2. Set each item.
3. Check the settings, and then click OK.
Basic
Items
Top Offset(-30.0-30.0mm)
Left Offset(-30.0-30.0mm)
Top Offset in Back(-30.0-30.0mm)
Left Offset in Back(-30.0-30.0mm)
Check Paper Width
Skip Blank Page
PDL Print Configuration
You can specify settings for PCL or PostScript printing.
This item is displayed on a PCL or PostScript compatible printer.
Common Settings
Items
Paper Size
Paper Type
Orientation
Quality
Ink Save Mode
>
Settings to Use the Printer
Sets the vertical position of the paper on which printing starts.
Sets the horizontal position of the paper on which printing starts.
Sets the vertical position of the paper on which the printing of the back side of
the paper starts in duplex printing.
Sets the horizontal position of the paper on which the printing of the back side of
the paper starts in duplex printing.
Set whether to check paper width when printing.
If there is a blank page in the print data, set not to print a blank page.
Select the paper size on which you want to print.
Select the type of paper on which you print.
Select the orientation you want to use to print.
Select the print quality you want to use for printing.
Set whether to print with reduced ink consumption.
375
>
Using the Print Functions
Explanation
Explanation
Advertisement
Table of Contents
