Table of Contents
Advertisement
Placing Originals
>
Note:
The sizes for the following originals may not be detected correctly. If the sizes are not detected, set the size manually on the
control panel.
❏ Originals that are torn, folded, wrinkled, or curled (if the originals are curled, flatten the curl before placing the
originals.)
❏ Originals with a lot of binder holes
❏ OHPs, translucent originals, or glossy originals
Related Information
"Original Size Auto Detection Option:" on page 320
&
Placing Originals
Place originals on the scanner glass or the ADF.
You can place multiple originals in the ADF. If auto duplex scanning is available, you can scan both sides of the
originals at the same time. See the link below for the specifications of the ADF.
"ADF Specifications" on page 346
Follow the steps below to view the video for placing originals.
Select
, and then select How To > Place Originals. Select the method of placing originals that you want to view.
Select Finish to close the animation screen.
When using the scanner glass
Caution:
!
Be careful not to trap your fingers when closing the document cover. Otherwise you may be injured.
Important:
c
❏ When placing bulky originals such as books, prevent exterior light from shining directly onto the scanner glass.
❏ Do not apply too much force to the scanner glass or the document cover. Otherwise, they may be damaged.
Placing Originals
37
Advertisement
Table of Contents
