Funktionsbeschreibung Ventiltechnik Svk / Description Of Functions: Svk Valve Technology - Schmalz FXP Series Operating Instructions Manual

Vacuum area gripping system
Table of Contents

Advertisement

Bedienungsanleitung
Operating Instructions
30.30.01.01008
3.2 Funktionsbeschreibung Ventiltechnik SVK / Description of functions: SVK valve
technology
Schritt / Step
1
2
3
4
* Bei der Ventiltechnik SW kann mit eingeschaltetem Ejektor
auf das Werkstück aufgesetzt werden.
Hinweis
Die optimale Funktionalität steht bei der Ventiltechnik SVK
zur Verfügung, wenn der Greifer horizontal eingesetzt wird.
Bei schräg gestelltem oder bei Schwenkvorgängen ist das
Abdichtverhalten auf rauen / strukturierten
Werkstückoberflächen etwas eingeschränkt.
 Maximal zulässiger Schwenkwinkel gegenüber der
Horizontalen bei SVK: 60°
 Maximal zulässige Beschleunigung in vertikaler Richtung
bei SVK: 5m/s²
 Nachsaugen oder späteres Aufnehmen weiterer Produkte
nicht möglich!
FXP(-S)-SVK / FXP(-S)-SW
FXP(-S)-SVK / FXP(-S)-SW
Status 01.2020 / Index 5
Bezeichnung
Vakuumerzeugung ausschalten bzw. Ejektor
von der Druckluftzufuhr trennen*
Greifer auf Werkstück aufsetzen – Dichtplatte
/ Sauggreifer sollte min. 40 %
zusammengedrückt werden
Druckluft für den Ejektor zuschalten
Werkstück mittels Vakuum anheben
Page -18-
J. Schmalz GmbH
Johannes-Schmalz-Str. 1
D - 72293 Glatten
Tel +49 (0) 7443 / 2403 - 0
Fax +49 (0) 7443 / 2403 - 259
www.schmalz.com
schmalz@schmalz.de
Designation
Switch off vacuum generation and/or
disconnect ejector from the compressed air
supply.
Set the gripper down on the workpiece – the
sealing plate/suction pad should be 40%
compressed.
Supply compressed air to the ejector.
Lift the workpiece using the vacuum.
* Grippers with valve technology SW can be placed on the
workpiece when the ejector is switched on.
Note
The valve technology SVK functions optimally when the
gripper is used horizontally. For swiveling operations or
movements at an incline, the sealing properties for
workpieces with rough/textured surfaces it somewhat limited.
 Maximum permitted swivel angle relative to the horizontal
for SVK: 60°
 Maximum permitted acceleration in a vertical direction for
SVK: 5 m/s²
 It is not possible to provide additional suction or pick up
other products afterward.

Advertisement

Table of Contents
loading

Table of Contents