Table of Contents
Advertisement
Hot surfaces and fluids
At operating temperature, the engine and its compo-
nents are hot. A hot engine always involves risk for
burn injuries. Take care with hot surfaces. E.g.: ex-
haust manifold, turbocharger, oil pan, charge air pipe,
starting heater, hot coolant and warm lubricant in pi-
pes and hoses.
WARNING! Do not open the crankcase
covers while the engine is still hot.
Carbon monoxide poisoning
Start the engine in well-ventilated spaces only. When
running in confined spaces, the exhaust gases and
crankcase gases must be evacuated.
Chemicals
Most chemicals such as glycol, anti-corrosion agent,
preservatives, degreasing agent, etc., are hazardous
to health. Always read and follow the directions on
the packaging.
Certain chemicals such as preservatives are
flammable and harmful to inhale. Provide good
ventilation and use breathing protection when
spraying. Always read and follow the directions on the
packaging. Store chemicals and other hazardous
materials out of reach of children. Leave left over or
used chemicals to a destruction plant.
Plus d'informations sur : www.dbmoteurs.fr
Cooling system
There is a risk of water entering when working on the
seawater system. Therefore, stop the engine and
close the seawater cock before starting work.
Avoid opening the coolant filler cap when the engine is
warm. Steam or hot coolant may spurt out and cause
burn injuries.
If the filler cap, coolant pipe, cock, etc., must
nevertheless be opened or dismantled while the
engine is warm, the filler cap must be opened
carefully to release the pressure before removing it
completely and starting work. Note that the coolant
can still be hot and cause burn injuries.
Lubricating system
Hot oil can cause burn injuries. Avoid skin contact
with warm oil. Make sure the lubricating system is de-
pressurized before starting work. Never start or run
the engine with the oil filler cap removed or there will
be a risk of the oil being thrown out.
Fuel system
Always protect your hands when carrying out leak de-
tection.
Escaping fluids under pressure can pierce bodily tis-
sue and cause serious injury. Risk of blood poisoning.
Always cover any electric component if it is located
under the fuel filter. Otherwise it might be damaged by
fuel spills.
Safety information
9
Advertisement
Table of Contents
