Table of Contents
Advertisement
Maintenance schedule
Every 250 operating hours or every 12 months
Change lubrication oil. Longer interval requires oil analysis
Change full flow and by-pass lubrication oil filters
Check/adjust V-belts
Check rawwater filter
Check/wash air inlet silencer filter
Every 500 operating hours or every 12 months
Change governor lubrication oil filter
Clean centrifugal by-pass lubrication oil filter
Every 1000 operating hours or every 12 months
Change fuel filter elements
Change filter elements of the fuel pre-filter/water separator
Check air filter (if installed)
Check/retighten bolts and nuts
Check/adjust fuel injection timing
Check/adjust fuel injection pressure and spray pattern
Change fuel injection nozzle o-rings
Check and adjust valve clearance and valve mechanism
Check rawwater pump
Every 2000 operating hours or every 12 months
Check/adjust valve clearance. Check valvemechanism
Check turbocharger
Check starter motor
Check alternator
Check fuel injection pump flex drive plates
Check fuel injection pump control rack operation
Check fuel rack control "ball joints"
Check/clean charge air cooler(s)
Check/clean cooling water heat exchanger
Check coolant concentration
Check torsional vibration dampers
Check alarm and shut-down functions
Check engine control panel functions
Change V-belts
Change fuel pre-filter/water separator element
Check/change zinc anodes
Change air inlet silencer filter
Plus d'informations sur : www.dbmoteurs.fr
36
Advertisement
Table of Contents
